GSAP-111 - TORCH, W/BP-6TE, Pilot valve
$115.00 $82.14 On Sale!
GSAP-111
Goss AP-111 torch is 30 inches in length and has the BP-6TE tip. The AP-111 is a torch for applications requiring large volumes of heat. At the squeeze of a lever, operator can go from pilot flame to a full-brush flame.
|
GSAP-111M - TORCH, w/BP-66 Igniter tip
$140.00 $100.00 On Sale!
GSAP-111M
Goss AP-111M torch is 30 inches in length and has the BP-66 - push button - tip. The AP-111M is a torch for applications requiring large volumes of heat. At the squeeze of a lever, operator can go from pilot flame to a full-brush flame. Piezoelectric Tip not shown.
|
GSAP-55 - TORCH, w/BP-5TE tip detail
$112.00 $80.00 On Sale!
GSAP-55
Goss AP-55 torch is 16 inches in length and has the BP-5TE tip. The AP-55 is a torch for applications requiring large volumes of heat. At the squeeze of a lever, operator can go from pilot flame to a full-brush flame.
|
GSKP-318-H - KIT, LP reg, Irg BP-6TE tip
$228.00 $162.86 On Sale!
GSKP-318-H
This Goss Roofer's torch kit is made up of our popular AP-111 heavy duty torch, EP-80G regulator, HEF-25 hose and MP-1 spark lighter. It is perfect for stand-up full width fusing. Provides plenty of heat for any modified job.
|
GSKP-318M-H - KIT, LP reg, BP-66 ignitor tip
$260.00 $185.72 On Sale!
GSKP-318M-H
This Goss Roofer's torch kit is made up of our popular AP-111 heavy duty torch with BP-66 ignitor tip end, EP-80G regulator, HEF-25 hose and MP-1 spark lighter. It is perfect for stand-up full width fusing. Provides plenty of heat for any modified job.
|
GSAP-54 - TORCH HANDLE, w/Pilot valve
$91.60 $65.43 On Sale!
GSAP-54
The Goss AP-54 is designed for continuous or intermittent use. At the squeeze of a lever, the operator can go from a pilot flame to a full-brush flame as needed. Has adjustable pilot valve.
|
GSAP-99R - TORCH HANDLE, Rear valve
$60.60 $43.29 On Sale!
GSAP-99R
The Goss AP-99R has the same quality construction and versatile features as all Ready-Flame torches but without the pilot valve and lever flame control.
|
GSEX-4B - EXTENSION, Bent Brass
$14.50 $12.00 On Sale!
GSEX-4B
The Goss EX-4B is a bent 4 inch brass extension that is designed to be screwed onto the AP-54 or AP-99R handle with one of the tip ends added.
|
GSEX-12B - EXTENSION, 12 Bent Brass
$25.70 $25.70 On Sale!
GSEX-12B
The Goss EX-12B is a bent 12 inch brass extension that is designed to be screwed onto the AP-54 or AP-99R handle with one of the tip ends added.
|
GSEX-18B - EXTENSION, 18 Bent Bras
$31.80 $31.80 On Sale!
GSEX-18B
The Goss EX-18B is a bent 18 inch brass extension that is designed to be screwed onto the AP-54 or AP-99R handle with one of the tip ends added.
|
GSEX-18DB - EXTENSION, 18 Double Bent
$44.00 $44.00 On Sale!
GSEX-18DB
The Goss EX-18DB is a bent double head 18 inch brass extension that is designed to be screwed onto the AP-54 or AP-99R handle with one of the tip ends added.
|
GSEX-18DS - EXTENSION, 18 Double Straight
$44.00 $44.00 On Sale!
GSEX-18DS
The Goss EX-18DS is a straight double head 18 inch brass extension that is designed to be screwed onto the AP-54 or AP-99R handle with one of the tip ends added.
|
GSBP-2TE - TIP END, Pencil pt flame, 11 K BTU
$55.90
GSBP-2TE
The Goss BP-2TE is 1 inch in diameter and puts out approx. 11,000 BTU's at 40 psi. These tips are to be used in combination with the AP-54 or AP-99R handles and the brass EX series extensions. The tip can be used with propane or mapp gas.
|
GSBP-3TE - TIP END, 7/8 dia, brush 14K BTU
$45.00
GSBP-3TE
The Goss BP-3TE is 7/8 inch in diameter and puts out approx. 14,000 BTU's at 40 psi. These tips are to be used in combination with the AP-54 or AP-99R handles and the brass EX series extensions. The tip can be used with propane or mapp gas.
|
GSBP-4TE - TIP END, 1-1/8 dia,brush,43K BTU
$41.50
GSBP-4TE
The Goss BP-4TE is 1 1/8 inch in diameter and puts out approx. 43,000 BTU's at 40 psi. These tips are to be used in combination with the AP-54 or AP-99R handles and the brass EX series extensions. The tip can be used with propane or mapp gas.
|
GSBP-5TE - TIP END, 1-3/8 dia,brush, 57 K BTU
$46.40
GSBP-5TE
The Goss BP-5TE is 1 3/8 inch in diameter and puts out approx. 57,000 BTU's at 40 psi. These tips are to be used in combination with the AP-54 or AP-99R handles and the brass EX series extensions. The tip can be used with propane or mapp gas.
|
GSBP-6TE - TIP END, 2-1/8 dia,brush, 300 K BTU
$48.80
GSBP-6TE
The Goss BP-6TE is 2 1/8 inch in diameter and puts out approx. 300,000 BTU's at 40 psi. These tips are to be used in combination with the AP-54 or AP-99R handles and the brass EX series extensions. The tip can be used with propane or mapp gas.
|
GSBP-66 - TIP END, Ignitor, 300K BTU
$78.00 $55.72 On Sale!
GSBP-66
The Goss BP-66 is 2 1/8 inch in diameter and puts out approx. 3000,000 BTU's at 40 psi. This tip end is made with a piezoelectric ignitor. These tips are to be used in combination with the AP-54 or AP-99R handles and the brass EX series extensions. The tip can be used with propane or mapp gas.
|
GSBP-8TE - TIP END, 3 dia brush, 300K BTU
$61.00 $43.57 On Sale!
GSBP-8TE
The Goss BP-8TE is 3 inch in diameter and puts out approx. 300,000 BTU's at 40 psi. These tips are to be used in combination with the AP-54 or AP-99R handles and the brass EX series extensions. The tip can be used with propane or mapp gas.
|
GSDP-11 - SOLDERING IRON, Lg Pyramid PI
$166.20 $118.72 On Sale!
GSDP-11
The Goss DP-11 Soldering Iron features adjustable pencil point flame, durable steel construction, replaceable copper ends and a removable stand.
|
GSKP-25 - KIT, LP reg, soldering iron
$316.60 $226.15 On Sale!
GSKP-25
Goss Air-Propane Torch Kit includes (DP-11) soldering iron, (DP-9A) copper tip, (HEF-10) hose, (EP-80G) regulator and (MP-1) lighter.
|
GSDP-9A - TIP END, Sm Pyramid
$31.80
GSDP-9A
Replacement tip end DP-9A for soldering iron DP-11 - Small pyramid 3/4 inches diameter. Copper only
|
GSFP-540 - FURNACE, LP Floor Type
$216.10 $154.36 On Sale!
GSFP-540
This Goss Floor Furnace is great for lead melting with a brush flame burner. Output is approx. 43,200 BTU's and uses about two pounds of propane per hour. The furnace stands 8 inches and weighs 8 lbs. For propane only.
|
GSFP-5000 - FURNACE, LP Utility Type
$249.70 $178.36 On Sale!
GSFP-5000
This Goss Utility Furnace is great for lead melting with a soft flame burner. Output is approx. 43,200 BTU's and uses about two pounds of propane per hour. The furnace stands 10 inches and weighs 9 3/4 lbs. For propane only.
|
GSFP-S1 - WINDSHIELD, Straight
$31.80
GSFP-S1
To help keep the flame confined on windy days, the Goss Wind Shield is just the thing. The FP-S1 is a straight sided wind shield with a diameter of 7 5/8 inch. The FP-S2 is a spun wind shield with a top diameter of 9 1/8 inch. The FP-S2 is shown
|
GSMP-3 - CAST IRON LEAD POT, 7 dia - 50# cap
$84.10 $60.07 On Sale!
GSMP-3
This Goss lead pot is a great addition to the Floor Furnace or the Utility Furnace. The cast iron pot is 7 inches in diameter and will hold 50 pounds of lead.
|
GSMP-5 - LADLE, 3 dia cast iron
$50.80
GSMP-5
LADLE, 3 dia cast iron
|
GSEP-60-1 - REG, LP LOW PSI, CGA 510 3/8 Flr
$24.30
GSEP-60-1
This Goss low pressure regulator is for vapor withdrawal cylinders. Not to be used with any Goss LP torches or furnace equipment. Comes standard with POL inlet and 3/8 inch flare outlet.
|
GSEP-60-3 - REG, LP LOW PSI, CGA 510 - B Hose
$26.90
GSEP-60-3
This Goss low pressure regulator is for vapor withdrawal cylinders. Not to be used with any Goss LP torches or furnace equipment. Comes standard with POL inlet and LH hose outlet.
|
GSEP-90-1 - REG, TYPE 1 OPD INLET - 3/8 Flare Outlet
$36.70 $36.70 On Sale!
GSEP-90-1
This Goss low pressure regulator is for vapor withdrawal cylinders. Not to be used with any Goss LP torches or furnace equipment. Comes standard with POL/OPD inlet and 3/8 inch flare outlet.
|
GSEP-90-3 - REG, TYPE 1 OPD INLET - LH Hose Outlet
$36.70 $36.70 On Sale!
GSEP-90-3
This Goss low pressure regulator is for vapor withdrawal cylinders. Not to be used with any Goss LP torches or furnace equipment. Comes standard with POL/OPD inlet and LH hose outlet.
|
GSEP-70G - REG FOR LP CYLINDER
$94.90 $67.79 On Sale!
GSEP-70G
GOSS PROPANE REGULATOR - Adjustable pressure from 5 to 60 PSI. Comes with a 0 to 60 PSI outlet pressure gauge, CGA-510 - POL inlet spud and nut and has a 9/16-18 left hand hose outlet
|
GSEP-80G - REG, LP CGA 510 w/o Gauge B Hose
$85.60 $61.14 On Sale!
GSEP-80G
GOSS PROPANE REGULATOR - Adjustable pressure from 5 to 60 PSI. Comes without a pressure gauge. CGA-510 - POL inlet spud and nut and has a 9/16-18 left hand hose outlet.
|
GSHEF-10 - HOSE, 10 ft propane B ftgs
$47.00
GSHEF-10
The Goss HEF-10 is a 10 foot top quality flexible propane hose with a working pressure of 350 psi. This hose is not designed for use with Natural Gas. The hose comes standard with 9/16-18 LH hose fittings.
|
GSHEF-12 - HOSE, 12 ft propane B ftgs
$54.00
GSHEF-12
The Goss HEF-12 is a 12 foot top quality flexible propane hose with a working pressure of 350 psi. This hose is not designed for use with Natural Gas. The hose comes standard with 9/16-18 LH hose fittings.
|
GSHEF-20 - HOSE, 20 ft propane B ftg
$81.20 $58.00 On Sale!
GSHEF-20
The Goss HEF-20 is a 20 foot top quality flexible propane hose with a working pressure of 350 psi. This hose is not designed for use with Natural Gas. The hose comes standard with 9/16-18 LH hose fittings.
|
GSHEF-25 - HOSE, 25 ft propane B ftg
$95.90 $68.50 On Sale!
GSHEF-25
The Goss HEF-25 is a 25 foot top quality flexible propane hose with a working pressure of 350 psi. This hose is not designed for use with Natural Gas. The hose comes standard with 9/16-18 LH hose fittings.
|
GSHP3-12 - HOSE, 12 ft propane/MAPP, B ftg
$49.10
GSHP3-12
The Goss HP3-12 is a 12 foot top quality flexible T grade hose with a working pressure of 200 psi. This hose is designed for use with Propane, Mapp and Natural Gas. The hose comes standard with 9/16-18 LH hose fittings.
|
GSDA-1 SOLDERING IRON, PYRAMID COPPER
$102.70 $76.00 On Sale!
GSDA-1
These irons are ideal for soldering light gauge sheet metal. Can be used with either model AA-1 or AA-3 torch handle.
|
GSDA-1A REPLACEMENT PYRAMID COPPER
$36.70 $30.00 On Sale!
GSDA-1A
Replacement copper pyramid head for the DA-1 Soldering Iron
|
GSDA-2 SOLDERING IRON, CHISEL POINT
$102.70 $76.00 On Sale!
GSDA-2
These irons are ideal for soldering light gauge sheet metal. Can be used with either model AA-1 or AA-3 torch handle.
|
GSDP-10 - SOLDERING IRON, Sm Chisel Copper
$155.20 $125.00 On Sale!
GSDP-10
The Goss DP-10 Soldering Iron features adjustable pencil point flame, durable steel construction, replaceable copper ends and a removable stand.
|
